EASYPRO

Electronic pump controller

Description
EASYPRO® differs from traditional PRESSURE-FLOW REGULATORS as a result of the following innovative characteristics: - the built-in surge tank; - the possibility to select the pump start-up (re-start) pressure; - the back-lit LCD display where the pressure and other useful information is indicated. PUMP START-UP PRESSURE EASYPRO makes it possible to select the pump start-up (re-start) pressure between the values of 1 and 5 bar. The pressure selection is made using the command button and by following the instructions that appear on the LCD display. A single model is capable of covering a wide range of installation requirements. SURGE TANK EASYPRO® comes complete with a built-in 3 litre surge tank. The substantial accumulation volume combined with its ability to absorb over-pressure, a typical surge tank characteristic, make it suitable for use in installations where other pressure-flow regulators may prove inadequate. In order to guarantee optimum protection and accumulator performance, it is possible to adjust the tank pressure, the factory setting is 1.8 bar, to suit the pump start pressure selected.
Features

Liquid type: Clean Water

Uses: domestic

Applications: water supply systems, pressure systems, irrigation pumps

typology: accessories

Family: easysmall-easypress-easypro

Application Limit:

  • Temperature of the liquid to +65 °C
  • Ambient Temperature to +40 °C
• Burst pressure: > 40 bar
• Protection: IP 65
• Voltage: 230 V - Frequency: 50/60 Hz - Max current: 16 A

model

phase

power

kW

HP

performance

Qmax
l/min

Hmax
m

Mouths

asp.

mand .

EASY PRO 2HP 230V DISPLAY VASO

Single Phase

15

2

-

-

1"

1"